What is the MSRM US302 Extender ?

MSRM US302  Extender Setup, you can simply extend the range of your current wireless network to any location. Four antennas are arranged in a patented omnidirectional arrangement to improve the performance and reliability of your existing network. With the MSRM US302 dual-band wireless range extender, you can progressively improve your wireless network.

You can connect all of your devices from any room in your house thanks to the high-performance antennae. MSRM US302  Extender Setup also connects to your router wirelessly. As a result, it immediately detects your router’s signals and begins boosting them.


1.MSRM US302 is the brand name of the model.

2. LAN Ports: There are two LAN ports.

3.WPS button / On & Off / Reset / Function selection button 3. Button

4. 10/100Mbps wired transmission rate

5. 1200Mbps Wi-Fi transmission speed

6. Wi-Fi 802.11g, Wi-Fi 802.11n, and Wi-Fi 802.11b standards and protocols

7. Supported Wi-Fi frequencies: 2.4 GHz and 5 GHz

8. 450 Mbps 2.4G Wi-Fi transmission rate

9.Wi-Fi transmission rate of 9. 5G: 867Mbps

10. The item’s weight is 260 grammes.

11.16.5 x 5.1 x 1inches / Dimensions (LXWxH): 6.5 x 5.1 x 1inches /

12. Plug types: US plug, EU plug, UK plug, and AU plug


1. 3-IN-1 MODE: Supports router, repeater, and access point modes; Multi-function mode readily meets all of your needs.

2. Enables 802.11AC standard, which is backward compatible with 802.11 a/b/g/n; supports 2.4G and 5G wireless network connections at the same time, with transmission speeds up to 1167Mbps; works with any WiFi-based routers or devices.

3. AC1200 WiFi AP/Router-Eliminate Wi-Fi dead zones and expand Wi-Fi coverage. Typically used to provide reliable Wi-Fi connectivity in large regions such as factories, communities, streets, and so on.

4. High-performance antennas, including 4x 3dBi high-performance antennas that improve wireless performance and transmission rate, support 2T2R dual-band concurrent operation, and improve WiFi signal intensity and connection stability.

5. WPS button provides “One-Press” connection and encryption, simplifying setting; smart LED light indicates the ideal location to balance coverage and performance. Note: For the best stable connection, choose a Wi-Fi network with a signal level of at least 70%.

6. Two 10/100Mbps ethernet LAN/WAN ports are shared, giving you a variety of options.

How do I install my MSRM US302  Extender ?

How do I setup my MSRM US302  Extender to improve signal strength? Follow the procedures below:

One of the simplest ways to connect the extender to an existing wifi network is to use the wireless protected setup ( W.P.S ) button.

To install the extender, follow the procedures below:

  1. As a first step, the extender should be placed near the main wifi modem or router..
  1. Connect the MSRM US302 wifi range extender to the internet and turn it on.
  1. Wait for the power lead to turn solid green before proceeding.
  1. Push the W.P.S button on the extender once you’ve gotten the power led light.
  1. Now go to your router/modem and press the W.P.S button on the router/modem.
  1. On your router and extender, a blinking green light will appear.
  1. Allow 1-2 minutes for the extension to sync with the home wifi system.
  1. The configuration of the MSRM US302  has been completed successfully.
  1. To complete the installation procedure, go to Ap.setup.

Firmware update for the MSRM US302  Extender 

Is your MSRM US302  Extender not providing enough WiFi speed even after a complete setup? Does it suddenly start acting strangely? If this is the case, download and install the MSRM US302  Extender  firmware upgrade right away.

  • Follow these procedures to update the firmware on your MSRM US302  WiFi range extender:
  • To begin, plug your MSRM US302 WiFi extender into a wall socket and turn it on.
  • Connect your MSRM US302  Extender  to your WiFi router.
  • After that, open your preferred internet browser.
  • Type Ap.setup or into the URL bar and press Enter.
  • Use the username and password to log in to your extender.
  • Firmware Update can be found in the Settings menu.
  • Then, on the next screen, click the Check button.
  • If a new firmware version is available, go ahead and choose Yes.
  • Allow time for the firmware of the MSRM US302  Extender  to update successfully.

What is the best way to get the best signal for my MSRM US302  Extender 

  1. Place your router in a visible location. Your router isn’t going to function in every location.
  1. Check to see if your router has been upgraded.
  1. Invest in a Better Antenna…

To get rid of WiFi Leeches, get a WiFi Repeater/Booster/Extender…. Customers and apps that utilise a lot of bandwidth must be regulated. Changing the WiFi Channels Take use of the most up-to-date WiFi technologies.

Techniques for Boosting Wi-Fi

  1. Place your router in a convenient location.
  2. Examine your router to see whether it need an upgrade.
  3. Invest in a Stronger Antenna.
  4. Wi-Fi parasites need to be removed.
  5. Purchasing a WiFi extension, repeater, or booster is a good idea.
  6. Changing your WiFi channel could help you handle bandwidth-hungry programmes and consumers more effectively.
  7. Use the most up-to-date WiFi technology.
  8. 5 GHz is the new frequency.
  9. It’s vital to get back on track.
  10. Wired Internet Performance
  11. Construct a WiFi Mesh Network
  12. It’s time to change your DNS address.